Developer
Version
3.70
Updated
March 21st, 2021
Requirements
Windows 11 / Windows 10 / Windows 8 / Windows 7
Version
323.1 KB
Description
The Intel single-Core, dual-Core, and quad-Core CPUs are supported by RealTemp Download For Windows, a temperature monitoring tool. A digital thermal sensor (DTS) is embedded in each core of these CPUs, providing information about the core’s temperature in relation to the CPU’s safe maximum operating core temperature (TjMax). Your Distance to TjMax will get smaller as your CPU temperature rises. If it drops to zero, your processor will begin to throttle, or slow down; therefore, keeping as far away from TjMax as possible will ensure peak performance and stability.
Digital thermal sensors (DTSs) on these CPUs measure core temperatures and report them in relation to TJMax, the highest temperature at which the CPU’s cores may safely operate. The Distance to TJMax will get smaller as your CPU temperature rises. If you’re too close to TJMax, your processor will begin to thermal throttle and slow down, so staying as far away as possible can improve performance and reliability.
With the help of a temperature alarm, you can have your system do an action on your behalf if the temperature rises to a certain threshold. You’ll need to set this value manually, which may be challenging for those who aren’t particularly tech knowledgeable. It would be ideal if the alarm temperature could be configured to force the closure of any hanging or idle applications.
In conclusion, this is a crucial component of any well-stocked computer maintenance toolkit. Crashing your computer is not a choice in our world, so if there is any means to prevent it, you should take it. In a time of crisis, the software may be quickly installed, updated, and understood. It has a solid foundation, has been available for evaluation for a long time, and is still going strong. You can trust that it will perform as advertised every time you use it. This is not going to be a disappointment.
The temperature readings from a 62 IR Thermometer are used as the basis for calculations in this program. CPUID, APIC ID, TJMax, and MHz, along with other calibration settings and indicators, will be shown. A warning will sound and the computer will power down if the temperature gets too high.
Download
How to install Real Temp?
1. Download the file.
2. Open the application and click on "Install ".
3. Follow the steps that appear on the screen.